WHAT ARE THE 8 TYPES OF LEATHER?
In selecting the best types of leather for any application, or buying ready-made leather products, it is important to understand the various types of leather produced today. Before moving on to the types or leather, here are some terms you would need to know.
Faux leather is not real leather. It is man-made leather made from synthetic materials such as plastic and rubber-coated fabric. Through technology, Faux leather has resulted in great improvement in the material composition, thus increasing the comfort level of sofas. It is durable and it looks like original leather however, it is the cheapest type of leather for furniture.
To differentiate faux leather from real leather, drop a small amount of water on the product, as leather absorbs moisture. If it is faux leather, the water will simply puddle up on top. While real leather would absorb the water.
Bonded leather is made from mixing shredded leather scraps and fibres, similar to the production of paper. It is then formed into a roll using adhesive or other bonding materials and extruded onto a fibre or paper backing cloth. After the roll is formed, it undergoes drying to reduce its moisture content. Since it usually contains 10 to 17 percent leather fibres, some industry experts expressed that they do not consider it as real leather.
Bonded leather is good for its comparatively low cost.
Bi-cast leather is made from using the lowest layers, “split” of the hide. This lowest layer is too thin or flawed for normal use as it lacks strength. Bi-cast leather also lacks the natural beauty of the top-grain layer. This layer is covered with a layer of polyurethane (constituents of paints, varnished, adhesives and foams) and afterwards being embossed to look like real leather.
Bi-cast leather does not demonstrate any of the same wear or comfort attributes of top grain. However, it can still serve as an economical alternative for people wanting the look of the leather without the price.
It is much less expensive and less durable compared to genuine leather.
Suede leather is made from the inner surface of the animal hides, visible on the underside of leather. Suede leather can be made from any animal hide but the most common is lamb, goat, deer, pig and calf. The type of animal has an effect on the finish of the suede. The thin innermost layer is cut off to create a thin, soft material.
Suede is rather durable and it is less expensive than Nappa or Nubuck. However, it gets dirty easily and is difficult to clean.
Full-grain describes the leather retaining the imprints original to the hide and the animal it was taken from. It is formed by removing the hair present on the skin of the hide. No polishing and finishing is done to the grain of the leather. Although there might be imperfections on the leather, it retains all of the original texture and markings of the original. This leather also tends to feel better over time. Due to its rarity and quality, Full-grain leather is one of the most expensive forms of leather available in the market.
6. Semi- Aniline
Semi-aniline leather is slightly pigmented. This type of leather treatment gives it a light surface protective coating. This coating protects the leather from scratching.
One downside of a semi-aniline finish, is that the added pigment uniforms the colouring, taking away some of the natural elements to the leather. The protective coat would protect the leather but would also make it harder to breathe and patina over time.
7. Top Grain
Top grain leather is the second highest grade of leather, which has its outermost layer of the hide. It is the second-highest grade of leather because it is split from the top layer of blemished hide, then sanded and refinished. Unlike Full Grain, Top grain leather does not age nicely with use. It is strong and durable, but may not hold up well with frequent use. As top grain leather does not have the strongest fibres of the hide, it can be easily pulled apart.
8. Genuine Leather
Genuine Leather is the third grade of leather and is produced from the layers that remain after the top is split off for the Full Grain and Top Grain laters. The surface is usually refinished to resemble a higher grade. Genuine leather can come from intermediate layers – between the top grain and suede. Genuine leather is simple to maintain and can last up to several years if properly cared for.
WHICH LEATHER IS THE MOST EXPENSIVE?
Which Leather is the most expensive? Shell Cordovan is the most expensive leather in the world because it is scarce since only a few places in the world raise horses for food and leather plus, it’s very difficult and expensive to make. The tanning process of Shell Cordovan can take up to 6 months to complete.
Shell Cordovan has so many great qualities beyond what has been mentioned above that makes it the most expensive leather in the world today. Keep reading to find out more!
WHAT DOES 100 PERCENT GENUINE LEATHER MEAN?
The fashion industry managed to establish a term whose meaning is somewhat difficult to grasp. According to the dictionary, the word “genuine” can have many meanings such as authentic, real, true, or actual. In other words, much more straightforward synonyms to the term “Genuine Leather” would be “True Leather”, “Real Leather”, or “100% Leather”. In short, genuine only means that something is actually made of leather but does not infer high quality.
WHAT TYPE OF LEATHER IS BEST?
It’s helpful to first have an understanding of what leather is: the hide of an animal. Most quality leather you encounter will be a byproduct of the US beef industry; repurposed from cows that have been raised for food these skins are high quality and well-maintained.